modem configuration and system setting of BSNL Broad Band modem, STARCOM TYPE-1 KANAVALU, UT STARCOM TYPE-2 KANA VALU, ZXDSL 531B (ZTE TYPE-2), ZXDSL 831AII (ZTE TYPE-1)

here explain how the configure of modem of bsnl broad band modem.
all the things a take from my dear friend amit katesia site bsnlbbsetting

setting‎
CONFIGURATION OF YOUR MODEM‎

UT STARCOM TYPE-1 KANAVALU
DATAONE (UTSTAR COM ) TYPE – I (WHITE)



IN BRIDGE MODE :-



OPEN INTERNET EXPLORER----192.168.1.1------USERNAME & PSWD”admin”---OK----HOME

PAGE WILL OPEN--LEFT HAND SIDE CLICKON WAN---SELECT BRIDGE MODE &

CONNECTION TYPE “1483 BRIDGE IP LLC” ----APPLY----THEN CLICK ON ADVANCE TAB

FROM HORIZANTAL MAIN ROW---CLICK ADSL ---SELECT MODULATION TYPE “ G.DMT”----

APPLY-----CLICK ON TOOL FROM ABOVE( HOME/ADVANCE/TOOL/STATUS/HELP)-----LEFT

HAND SIDE CLICK ON “MISC” ---CLICK SAVE & REBOOT OR RESTORE DEFAULT SETTING

WILL REBOOT MODEM.


NOTE:- IN STATUS GREEN COLOUR BALL SHOWS CONNECTED OR RED COLOUR BALL

SHOWS DISCONNECTED .


IN PPPOE MODE ( ALWAYS ON MODE) :-



OPEN INTERNET EXPLORER----192.168.1.1------USERNAME & PSWD”admin”---OK---IN LEFT

HAND SIDE CLICK WAN---SELECT ED PPPOE (DEFAULT )-----

GIVE USER NAME & PSWD----APPLY---- CLICK ON TOOL FROM ABOVE

( HOME/ADVANCE/TOOL/STATUS/HELP)-----LEFT HAND SIDE CLICK ON “MISC” ---CLICK

SAVE & REBOOT –WAIT FOR OPEN HOME PAGE.

type II

setting‎
‎CONFIGURATION OF YOUR MODEM‎
UT STARCOM TYPE-2 KANA VALU
UTSTAR COM TYPE – II ( WHITE)



IN BRIDGE MODE :-



OPEN INTERNET EXPLORER----192.168.1.1------USERNAME & PSWD”admin”---OK----HOME

PAGE WILL OPEN—CLICK ON INTERFACE SETUP---IN ENC APCULATION SELECT 4th

OPTION DOWN SIDE IN BRIDGE MODE -----SAVE----CLICK MAINTANANCE---SYS RESTART--

--RESTART.


MODE) IN PPPOE MODE ( ALWAYS ON:-



OPEN INTERNET EXPLORER----192.168.1.1------USERNAME & PSWD”admin”---OK----HOME

PAGE WILL OPEN—CLICK ON INTERFACE SETUP---IN ENC APCULATION SELECTED 3rd

OPTION DOWN SIDE IN PPPOE MODE -----GIVE USER NAME & PSWD ----SAVE----CLICK

MAINTANANCE---SYS RESTART----RESTART.


FOR G.DMT SET UP:-



ADVANCE SETUP -----ADSL----IN ADSLMODE SLECT “G.DMT’-----SAVE.



FOR FACTORY SETTING (DEFAULT ):-



CLICK MAINTANANCE-----SYS RESTART-----SELECT FACTORY SETTING----CLICK ON

RESTART.


FOR WIRELESS SECURITY KEY :-



INTERFACE SETUP-----WIRELESS---ENABLE AUTHENTICATION TYPE----SELECT “WEP”-----64



ZXDSL 531B (ZTE TYPE-2)

setting‎
‎CONFIGURATION OF YOUR MODEM‎ 


ZXDSL 531B (ZTE TYPE-2)

MODEM CONFIGURATION OF ZTE TYPE – I I ( WIRELESS) :-

IN BRIDGE MODE :-

OPEN INTERNET EXPLORER----192.168.1.1------USERNAME & PSWD”admin”---OK----LEFT

HAND SIDE CLICKON ADVANCE SETUP---IN 1st ROW OF 0-35 CLICK ON EDIT---NEXT---5th

OPTION BRIDGING SELECT---NEXT---NEXT—SAVE---SAVE/REBOOT---THEN WAIT FOR

OPEN INFORMATION PAGE.

IN PPPOE MODE ( ALWAYS ON MODE) :-

OPEN INTERNET EXPLORER----192.168.1.1------USERNAME & PSWD”admin”---OK---IN LEFT

HAND SIDE CLICK ADVANCE SETUP --- IN 1st ROW OF 0-35 CLICK ON EDIT---NEXT---2nd

OPTION PPPOVER ETHERNET (PPPOE) SELECTED ----NEXT---GIVE USERNAME & PSWD----
NEXT---NEXT---SAVE---SAVE/REBOOT---THEN WAIT FOR OPEN INFORMATION PAGE.

FOR FACTORY SETTING (RESTORE) :-

OPEN INTERNET EXPLORER----192.168.1.1------USERNAME & PSWD”admin”---OK--- DEVICE

INFORMATION WILL OPEN----LEFT HAND SIDE CLICK ON MANAGEMENT-----

SETTINMG----RESTORE DEFAULT ----IN RIGHT SIDE ---OK

FOR WIRELESS SECURITY :-

WIRELESS----SECURITY---SELECT SSID-ZXDSL 531B---NETWORK AUTHENTICATION –

“SHARED”----ENCRYPTION STRENTH 64 (HAX) 10 DIGIT.---- CURRENT NETWORK KEY 1:-

______________--SAVE/APPLY.

FOR DISABLE WIRELESS:-

WIRLESS -----BASIC----UNMARK ENBLE WIRELESS.—SAVE/APPLY.

BIT----GIVE KEY 1:-____________ -----SAVE.

NOTE:- IN UTSTAR COM IF WE DO SOME CHANGE THE SAVE & RESTART IS NECESSARY

PROCEDURE IS LAST.

MAINTANANCE-----SYS RESTART---CURRENT SETTING -----RESTART.

FOR SEE CONNECTED STATUS :-

STATUS---DEVICE INFO----IN 11th LINE DEFAULT GETWAY SHOWS.


setting‎
CONFIGURATION OF YOUR MODEM‎
ZXDSL 831AII (ZTE TYPE-1)
MODEM CONFIGURATION OF ZTE TYPE – I



IN BRIDGE MODE :-



OPEN INTERNET EXPLORER----192.168.1.1------USERNAME & PSWD”admin”---OK---PAGE OF

OVERVIEW DEVICE INFORMATION WILL OPEN----LEFT HAND SIDE CLICK ON

CONFIGURATION----INTERNET---PROBEBLY IN SECOND LAST ROW PPOE_0_35 RE PENCIL

(EDIT) WILL BE THERE CLICK---CHECK VPI- 0 & VCI- 35 ----THEN NEXT --- 4th OPTION

SELECT “BRIDGE” ---NEXT ----APPLY. -- PAGE OF CONFIGURATION WIL OPEN AND BRIDGE

0-35 WIL BE IN LAST ROW.


CHECK IN PROTOCOL RFC 1483 BRIDGED LIC BRIDGE WILL BE THERE.



IN PPPOE MODE ( ALWAYS ON MODE) :-



OPEN INTERNET EXPLORER----192.168.1.1------USERNAME & PSWD”admin”---OK---PAGE OF

OVERVIEW DEVICE INFORMATION WILL OPEN----LEFT HAND SIDE CLICK ON

CONFIGURATION----INTERNET---PROBEBLY IN SECOND LAST ROW PPOE_0_35 CONNECT

WILL BE THERE –CLICK ON CONNECT---GIVE USER NAME & PSWD----THEN CLICK ON

CONNECT. IF USERNAME & PSWD IS RIGHT THEN IN CONFIGURATION PAGE IN LINE OF 0-

35 “DISCINNECT” MARK WILL APPEAR.


FOR FACTORY SETTING (RESTORE) :-



OPEN INTERNET EXPLORER----192.168.1.1------USERNAME & PSWD”admin”---OK---PAGE OF

OVERVIEW DEVICE INFORMATION WILL OPEN----LEFT HAND SIDE CLICK ON SYSTEM-----

RESET & RESTART---CLICKON RESET TO FAQCTORY DEFAULT SETING (RIGHT MARK WILL

APPEAR IN BOX) ---DOWN SIDE CLICK ON RESTAR

THEN ALL CHANGES MADE BY SUBSCRIBER WILL DISAPPEAR & MODEM CHANGE IN PPPOE

MODE.


source amit katesia website http://bsnlbbsetting.webs.com//